Chhabra, Meenu

The availability of safe drinking water in non-networked rural areas and disaster-affected zones is dependent on point-of-use water filters. This study describes the design and performance assessment of a personal portable ceramic water filter named “sip-up.” Four sample variants were made using clay, exfoliated graphite (EG), and sawdust as raw materials. Samples were made using a mold to ensure uniformity and sintered at 850 °C. The experimental results showed that the sample containing the maximum amount of sawdust had the highest porosity of 36.07 ± 1.8%, providing an average flow rate of 0.61 ml/min in passive mode. The average pore size radius of all variants varied in the range of 1–10 nm, classifying the material as having a mesoporous structure. Compressive test results indicate that the addition of an organic additive (sawdust) decreases the compressive strength of filters as compared to non-organic additives. It has been observed that the addition of EG to clay does not significantly improve water filtration parameters as compared to samples containing only sawdust and clay. However, due to the smaller pore size, samples containing EG performed better in E. coli removal as compared to sawdust-containing samples. The final prototype can act as a single-use personal water filtration device that can be inserted into any commercial water bottle, making it an affordable and effective solution for hikers, travelers, and natural disasters such as floods and cyclones.

A sensitive and rapid electrochemical sensor has been developed to detect Escherichia coli (E. coli) bacteria that is crucial for ensuring safe drinking water. E. coli significantly contributes to waterborne contamination, driven by overexploitation and insufficient cleanliness around water bodies. This work incorporates synthesis and characterization of graphene oxide (GO), sensor preparation, and sensor testing in the presence of varying E. coli dilutions via H2O2 decomposition. GO is used as a sensing layer and drop casted on the working electrode of screen printed electrode (SPE). The sensor is exposed to different bacterial solutions using varied bacterial concentrations and fixed percent solution of H2O2. The interface of GO and bacterial solution results in a change in potential. The cross-sensitivity tests have also been performed in the presence of chemical compounds found in wastewater samples, Pseudomonas aeruginosa and Citrobacter youngae. The sensor demonstrates a detection limit of 2.8 CFU/mL, with a sensitivity of 5.1 mV-mL/CFU, fast response time and excellent repeatability when tested with E. coli. Its performance has also been assessed by comparing the sensing results for regular tap water, reverse osmosis (RO) water, and deionized water samples. This work paves the way for developing a chip-based system to detect E. coli in water.

Microalgal biorefineries have emerged as significant reservoirs of therapeutic compounds, including pigments and proteins. Facilitating a robust circular bioeconomy necessitates the augmentation of pigment synthesis alongside algae biofuel production. Nevertheless, inherent constraints in ketocarotenoid synthesis exist in naturally fast-growing microalgae strains, such as Chlamydomonas reinhardtii. To address this limitation, we overexpressed two pivotal enzymes in the carotenoid biosynthetic pathway, namely β-carotene hydroxylase (crt) and β-carotene ketolase (bkt), in C. reinhardtii utilizing strong promoters to amplify carotenoid production. The genetically modified (GM) microalgae were validated through PCR, Southern hybridization, and Western blot assays, confirming the presence and expression of both genes in the C. reinhardtii strains. These GM lines exhibited a substantial enhancement over wild-type (WT) algae, showcasing a remarkable 5.39-fold increase in β-carotene concentration and twofold increase in total carotenoids compared to the WT microalgae. Notably, the GM microalgae achieved astaxanthin production up to 1.47 ± 0.063 mg/g DCW, a compound absent in WT C. reinhardtii. These findings indicate the successful functionalization of Hematococcus pluvialis genes through nuclear expression in C. reinhardtii, facilitating ketocarotenoid production. This study presents a valuable strategy to boost carotenoid production in microalgae by stable overexpression of two heterologous genes within the nuclear genome of C. reinhardtii. Graphical abstract: (Figure presented.) Graphical abstract for the study carried out which represents the in silico plasmid vector designing, algae transformation by electroporation, selection on antibiotic plates, PCR amplification for GM confirmation, Southern hybridization to confirm gene integration, Western blotting to check protein expression, pigment quantification, and algae growth determination.

This study investigated the effect of co-culturing the photobiont and mycobiont in the microbial fuel cell (MFC) cathode on biomass production, lipid generation, and power output. Chlorella vulgaris provides oxygen and nutrients for the yeast Cystobasidium oligophagum JRC1, while the latter offers CO2 and quench oxygen for higher algal growth. The MFC with co-culture enhanced the lipid output of biomass by 28.33%, and the total yield and productivity were 1.47 ± 0.18 g/l and 0.123 g/l/day, respectively. Moreover, with co-culture, the open circuit voltage of 685 ± 11 mV was two times higher than algae alone. The specific growth rate (day−1) at the cathode was 0.367 ± 0.04 in co-culture and 0.288 ± 0.05 with C. vulgaris only. The power density of the system was 5.37 ± 0.21 mW/m2 with 75.88 ± 1.89% of COD removal. The co-culture thus proved beneficial at the MFC cathode in terms of total energy output as 11.5 ± 0.035 kWh/m3, which was 1.4-fold higher than algae alone.