Options
ZnO-<sup>6</sup>LiF/polystyrene composite scintillator for thermal neutron radiation detection
ISSN
00346748
Date Issued
2023-02-01
Author(s)
Sahani, R. M.
Pandya, Arun
Dixit, Ambesh
DOI
10.1063/5.0126282
Abstract
We report the preparation of the ZnO-6LiF composite with a polystyrene (PS) polymer as a host using the solution mixing process. 6LiF acts as a converter material that absorbs a thermal neutron and produces alpha particles, which excites ZnO micro-particles, resulting in UV-vis photons' emission. The free-standing ZnO-6LiF/PS composite film is coupled to a photomultiplier tube (PMT). 241Am-Be (1Ci) is used as the neutron radiation source for measuring the response. We compared the response of the composite scintillator consisting of (i) natural LiF and (ii) 95% 6Li enriched LiF (6LiF). The increased pulse heights are recorded for 95% 6Li enriched, i.e., 6LiF converter. It confirms the generation of alpha particles after the absorption of a neutron in 6LiF. Furthermore, ZnO and 6LiF are considered in different weight proportions, 2:1, 1:1, and 1:2, keeping the total loading 50% (w/w) of polystyrene. The ZnO:6LiF (1:1)/PS composite showed higher scintillation pulse heights than the other two composites. Repetitive measurements are performed for the ZnO-6LiF(1:1)/PS composite, showing ±5% variation in respective responses. We also investigated the impact of different counting times and source-to-detector responses for the ZnO-6LiF(1:1)/PS composite. The response increases linearly with neutron dose, exhibiting a sensitivity of ∼203 counts/μSv. Neutron measurement counts at different source-to-detector distances have a similar trend as that of neutron dose measured by using a neutron dosimeter. Thus, this work demonstrated the potential of the ZnO-6LiF/PS composite, coupled to PMT for detecting thermal neutron radiation.